- #CONNECT ECHOLINK STATIONS PORTABLE#
- #CONNECT ECHOLINK STATIONS ANDROID#
- #CONNECT ECHOLINK STATIONS SOFTWARE#
- #CONNECT ECHOLINK STATIONS PASSWORD#
You can find the Node number on the EchoLink computer program by simply moving your mouse pointer over the repeater of interest – an info box will appear with the node number shown at the bottom. These Node numbers are needed to easily connect to other repeaters, etc, via your radio’s microphone keypad, if so equipped.
Every Repeater, User, Conference, Link has a Node number. Then your Favorites will be automatically populated with stations that you connect to. Then select OK, and OK again to get out of this series of Menus.Īnother Preference checkbox to consider selecting is “Add New QSO’s to Favorites”, which can be found under Tools, Preferences, on the List tab. You can change that action to be like most radio’s PTT buttons, holding the space bar down as long as you are talking, by going through the following Menus: Tools, Preferences, Connections, PTT Control…, and select the “Momentary” checkbox. The default PTT action is push once to start talking, and push again when you stop talking. When you are using EchoLink on a computer, one typically uses the space bar as a push-to-talk (PTT) button.
#CONNECT ECHOLINK STATIONS PASSWORD#
Be sure to record your password so you can use the password with your callsign on other devices at a later time. When you first start using EchoLink, you must create an account and get your call sign validated. More info about linking to other repeaters from your radio appears below. However, if you want to use your radio to access another node, you will need a radio equipped with a microphone capable of generating DTMF tones – such will have a microphone with a numeric keypad.
To learn more about EchoLink, download the computer program and to validate your call sign, click this link.Īs long as your computer has speakers and microphone built-in, you don’t need any other hardware to use EchoLink.
#CONNECT ECHOLINK STATIONS ANDROID#
Versions are available for multiple different devices, include Android phones and tablets, Apple iPhones and iPads, plus Windows and Mac computers.
#CONNECT ECHOLINK STATIONS SOFTWARE#
If you wish to connect to GB3RF from your phone, PC or another EchoLink node just look in the station listing for GB3RF-R or it's node number 333195 and connect.EchoLink is free software which allows Amateur Radio stations to get on any EchoLink enabled repeater from a smartphone, tablet, computer or other device with an internet connection. This means that local users can still access their repeater when away from home and we also get people from around the world connecting to hold QSO's with local users. It is set up to only accept incoming connections. Users accessing GB3RF directly using FM radios cannot control the repeater and make it connect to other EchoLink nodes. GB3RF implements EchoLink in a slightly nonstandard way. Here is a link to the EchoLink website where you can learn about the system and download the software for your PC. If you are a licensed amateur with an Internet-connected PC, you can access EchoLink stations directly from your PC. If you are in range of an FM repeater or simplex station equipped with EchoLink, you can use DTMF commands from your radio to access the EchoLink network. You can access EchoLink either with a radio or a computer.
#CONNECT ECHOLINK STATIONS PORTABLE#
This greatly enhances the range and utility of mobile and portable VHF/UHF-FM stations, and also allows computer-equipped hams to access distant repeaters directly. You can use EchoLink to connect your station (or your computer) over the Internet to other amateurs using the same software, and carry on a voice QSO.
You are here: Home» Info » Echolink EcholinkĮchoLink allows licensed Amateur Radio stations to connect to one another over the Internet.
0 kommentar(er)
